photo home-56.png photo about-48.png photo perfect-reads.png photo networks.png photo contact-47.png photo videos-4.png

Monday, May 26, 2014

DIY Earring Holder

I'm so excited to share this super easy DIY Earring Holder with you today!  I can not take the credit for thinking of this.  It was all my step-sister Nicole.  I saw it at her house and fell in love.  She told me exactly what I needed in order to make one for myself and now I wanted to share it with you! Once you pull of the items together the actual project takes about 3 minutes!

You will need:

  • One picture frame of your choosing.  Any size will work.  Nicole used an 11x14.  I used a 9x12.  It's important to find a frame with the metal tabs on the back - see picture below. 
  • One decorative metal sheet
  • Metal snips

I purchased all three of these items at Hobby Lobby.  You can also get the metal sheets at Home Depot.  Hobby Lobby had three different style options - all were $11.99 per sheet which would make about two holders depending on the size of your frame. 

All you have to do is take your picture frame and remove the glass and backing.  Measure your metal sheet and cut it to fit inside the frame.  Secure the sheet with the picture frame tabs.  Done!

I used a metal frame stand to lean the frame against and then hung my favorite earrings. 

Thanks Nicole for this fun and easy project.  I LOVE it!

1 comment:

  1. I did the same thing a while back but I added cork behind the metal so that I could put studs in it too!



Site Design by Fabulous K